Callistemon citrinus (Crimson Bottlebrush)

Callistemon citrinus (Crimson Bottlebrush) - Complete Bonsai Guide

Callistemon citrinus (Crimson Bottlebrush)

Complete bonsai care guide for Crimson Bottlebrush
🌿 Broadleaf Evergreen • Beginner • Modern Tradition
18 min read
Callistemon citrinus bonsai illustration Artistic bonsai illustration of Callistemon citrinus, a broadleaf evergreen species Broadleaf Evergreen • Myrtaceae
🌿
Broadleaf Evergreen
☀️
Outdoor
🎯
Beginner
🎨
Moyogi, Shakan, Multi Trunk
✅
Wiring: Good
📐
Shohin, Chuhin, Omono
🚀
Modern Tradition
12345678910111213
USDA Zones 9–11
🌍
Australia
12345678910111213 Monthly Bonsai Care Calendar J F M A M J J A S O N D Watering Feeding Pruning Repotting

Introduction

Callistemon citrinus Crimson Bottlebrush Quick Profile Family: Myrtaceae Group: Broadleaf Evergreen Origin: Australia Difficulty: Beginner Tradition: Modern Growth: moderate Foliage: evergreen 🌿 Bonsai Overview

Callistemon citrinus, the crimson bottlebrush, produces the most structurally distinctive flowers of any bonsai species — cylindrical spikes of brilliant scarlet stamens up to 10 cm long that give the genus its common name, appearing in late spring and sometimes repeated in late summer. The narrow, lemon-scented leaves (when crushed), grey-brown furrowed bark on old trunks, and tolerance of heat, drought, and alkaline soils make it a practical outdoor bonsai for warm-climate practitioners. The persistent woody seed capsules arranged in beads along branches remain for years and add textural interest to the winter composition.

Callistemon citrinus (Curtis) Skeels is an evergreen shrub to small tree reaching 4 m, native to southeastern Australia where it grows along creek banks, in woodland, and in scrub from coastal to montane habitats. The leaves are 3-7 cm long, lanceolate, stiff, mid-green, with a citrus fragrance when crushed from the oil glands visible against the light. Bark on old stems is grey-brown, rough and furrowed. Flowers are produced in dense cylindrical spikes 6-10 cm long at the tips of previous season's growth — the 'bristles' of the bottlebrush are the conspicuous red stamens tipped with yellow pollen anthers; the petals are reduced and inconspicuous. After flowering, the shoot continues growing beyond the flower spike, leaving a ring of persistent, hard, seed capsules 5-6 mm diameter around the branch that remain for many years. Fruit capsules in species typically require fire to open and release seed.

Quick Facts
Common Name Crimson Bottlebrush Family Myrtaceae
Origin Australia Indoor/Outdoor Outdoor
Bonsai Tradition Modern Japanese Name —
Difficulty Beginner Group Broadleaf Evergreen
Recommended Styles Moyogi (Informal Upright), Shakan (Slanting), Multi Trunk
Size Categories Shohin (15–20 cm), Chuhin (25–46 cm), Omono (46–76 cm)

History & Tradition

Callistemon bonsai has developed primarily in Australia and New Zealand where the genus is native, and in warm-climate regions where outdoor culture is possible. Australian bonsai practitioners have developed the species more than any other country, with growing expertise in styling techniques appropriate to its distinctive growth and flowering characteristics. In the global bonsai community, Callistemon represents Australian native species practice.

About Broadleaf Evergreen Bonsai

Broadleaf evergreen bonsai maintain year-round foliage while offering the leaf detail and trunk character of deciduous trees. Boxwood (Buxus) develops exceptionally dense foliage that can be refined into precise cloud-like pads. Olive trees (Olea europaea) bring Mediterranean character with their silver-green leaves and ancient-looking hollowed trunks. Ilex (holly) species offer dark glossy foliage and occasional berry displays. Privet (Ligustrum) grows vigorously and tolerates heavy styling, making it a productive training species. Camellia bonsai provide winter flowering combined with glossy, architectural foliage. These species generally tolerate shade better than conifers and deciduous trees, making them versatile additions to any collection.

Botanical Profile

Foliage Detail Apex Midrib Base Taxonomy Kingdom: Plantae Family: Myrtaceae Genus: Callistemon Species: citrinus Type: evergreen tree Foliage: evergreen Bark: grey-brown, furrowed Bonsai Characteristics Ramification: medium Leaf reduction: good Nebari: easy Deadwood: not_suitable Wire type: aluminum Bark scarring: moderate
Taxonomy & Characteristics
Family Myrtaceae Genus Callistemon
Species citrinus Plant Type evergreen tree
Origin Australia Growth Rate moderate
Foliage Type evergreen Bark Character grey-brown, furrowed
Autumn Color Height Range 15-70

Callistemon citrinus (Curtis) Skeels belongs to family Myrtaceae. Following recent molecular studies, most Callistemon species have been transferred to the genus Melaleuca — the current accepted name is Melaleuca citrina (Curtis) Dum.Cours., though Callistemon citrinus remains in very wide horticultural use. Chromosome number 2n=22. The persistent seed capsules are a distinctive Callistemon feature. Cold-hardy to USDA zone 8-9 depending on provenance.

Common pests to watch for: scale insects, mealybugs, spider mites

Bonsai Styles

Chokkan Moyogi Kengai Bunjin Fukinagashi Yose-ue
Recommended Styles for Callistemon citrinus
Style Japanese Name
Moyogi Informal Upright
Shakan Slanting
Multi Trunk

Informal upright suits the irregular branching and natural drooping branch tips of wild Callistemon. Semi-weeping or slanting styles emphasize the naturally pendulous branch tips. Cascade suits collected cliff-face material. The flower spikes appear at branch tips — branch structure design should maximize the number and visibility of shoot tips for the flowering period. The persistent seed capsule rings along branches are distinctive textural features to be incorporated into the composition rather than removed.

Style suitability: The styles listed above are particularly well-suited to the growth habit, branch structure, and natural character of Callistemon citrinus. Select a style that complements the tree's existing trunk movement and branch placement.

Group Style Guide

Literati (bunjin) style suits boxwood and olive, emphasizing their naturally sparse, aged character. Informal upright is the most versatile style for broadleaf evergreens, accommodating various trunk shapes. Olive bonsai often develop hollowed trunks that suit dramatic driftwood and deadwood features. Root over rock works well with fig and privet species that develop strong surface roots. Broom style (hokidachi) is effective for dense-growing species like privet and boxwood. Multi-trunk and clump styles suit species that naturally produce basal shoots.

Trunk & Nebari

Trunk & Nebari Jin Shari Cross-Section Annual growth rings Taper Guide Ideal trunk taper: 1:6 ratio base width to height. Nebari: easy Deadwood: not_suitable Bark: grey-brown, furrowed
Trunk Characteristics
Nebari Development easy Deadwood Suitability not_suitable
Bark Scarring Risk moderate Bark Character grey-brown, furrowed

Old collected Callistemon from creek banks or rocky hillsides develops outstanding trunk character — deeply furrowed grey-brown bark and strong trunk movement from exposure to seasonal floods. Container-raised trunk development is moderate. Surface roots respond to root-combing. The rough bark texture develops on trunks over 3 cm diameter.

Deadwood Techniques

The rough, furrowed grey-brown bark creates naturalistic transitions with deadwood features. Jin on branch stubs bleaches to an attractive pale grey that contrasts with the living bark. The persistent seed capsule rings on branches are not deadwood but function as permanent textural features that visually reference the species' natural flowering-and-continuing-growth cycle.

Bark scarring risk: moderate — Take extra care when wiring Callistemon citrinus. Use raffia or protective wrapping on thick bends, and check wires frequently to prevent them cutting into the bark.

Wiring & Shaping

Wiring Technique 45° spacing Wiring Tips Wire type: aluminum Suitability: good Bark scarring risk: moderate • Wire at 45° angle to branch • Wire thickness = 1/3 branch diameter • Remove before wire bites into bark • Use raffia protection on thick bends
Wiring suitability: good • Wire type: aluminum (1.5–4 mm aluminum)

Wire during the growing season with aluminum. The somewhat brittle branches require careful technique. The distinctive flower spikes at branch tips mean that wiring and bending must be done after flowering and before the next season's terminal growth has committed to a flowering spike. Check wires every six to eight weeks.

Wiring Reference for Callistemon citrinus
Wire Type Bark Scarring Risk Best Season
Aluminum Lower (softer wire) Late autumn / early spring
Annealed copper Higher (holds shape better) Late autumn / early spring
Wire removal timing: Check wired branches every 2–4 weeks during the growing season. Remove wire before it begins to bite into the bark. On fast-growing species like Callistemon citrinus, wire marks can become permanent scars within a single growing season.

🌍 Distribution Map

Native origin: Australia

Native Origin
Range Boundary

Pruning & Pinching

Pruning Guide Before After Pruning Principles • Maintenance prune during growing season • Structural prune during dormancy • Cut to a bud facing the desired direction • Seal large cuts with wound paste • Remove crossing and downward branches • Balance vigor between strong and weak areas • Ramification: medium
Pruning Characteristics
Ramification Quality medium Leaf/Needle Reduction good

Prune after flowering in early summer, cutting back beyond the spent flower spike to encourage branching from the new growth that continues beyond it. Do not remove the persistent seed capsule rings — these are part of the branch's distinctive character. Back-budding from old wood is possible but less reliable than in privets — avoid pruning into completely bare wood. Maintain foliage on all retained branches.

Expert Tips: The most common error with Callistemon bonsai is pruning at the wrong time — the post-bloom pruning window (immediately after the main flowering) is critical for developing the branching that will carry next year's flower spikes. A tree pruned in autumn or winter has its developing flower buds removed. Establish a seasonal calendar with the post-bloom prune as the single most important annual intervention, and subordinate all other shaping decisions to this timing requirement.

Watering

Watering & Drainage Mesh Drainage Substrate Moss Watering Rules • Water thoroughly until it drains from holes • Water when soil surface begins to dry • Never let bonsai sit in standing water • Adjust frequency for season and weather • Use a fine-nozzle watering can • Morning watering is preferred • Rainwater or dechlorinated water is best
Indoor/Outdoor classification: Outdoor — this affects watering frequency, as outdoor bonsai dry out faster in sun and wind.

C. citrinus tolerates drought once established but performs best with consistent moisture during the growing season. The creek-bank origin indicates tolerance of wet feet during wet seasons — more waterlogging-tolerant than most Myrtaceae. In container culture, water thoroughly when the top two centimeters dry and ensure drainage is functioning. Reduce watering in winter.

Overwatering vs. underwatering: Yellow leaves and soft, dark roots indicate overwatering and root rot. Crisp, dry leaves and lightweight soil indicate underwatering. Both conditions stress the tree — consistent, attentive watering is the foundation of successful bonsai care.

Soil & Repotting

Soil & Repotting Drainage mesh Lava rock Akadama mix Sphagnum moss Substrate Details Mix: standard_akadama_mix Repot every 2 years Root pruning: moderate • Use particle sizes 2–6 mm • Never use garden soil in bonsai • Repot in spring before bud break • Secure tree with wire through drain holes
Substrate & Repotting Guide
Substrate Type Standard Akadama Mix
Repotting Frequency Every 2 years
Root Pruning Tolerance moderate

Repot every two to three years in early spring. A moderately free-draining mix with some organic matter — 50% akadama, 30% pumice, 20% composted bark — reflects the creek-bank native habitat that is richer in organic matter than typical bonsai substrates. Root pruning of up to one-third is tolerated. Unlike most Myrtaceae, C. citrinus is more tolerant of pH variation including slightly alkaline conditions.

Group Soil Recipes

Broadleaf evergreen substrate balances moisture retention with drainage: 50% akadama, 25% pumice, 15% lava rock, 10% composted bark. Olive bonsai prefer very fast-draining, mineral-rich substrate with extra pumice and minimal organic matter. Boxwood tolerates standard mixes. Privet and holly are undemanding regarding soil composition. Repot every 2–3 years in spring. Camellia prefers acidic substrate similar to azalea, using kanuma instead of akadama. Mediterranean species like olive and myrtle benefit from a limestone chip addition for calcium.

Repotting timing: Repot Callistemon citrinus in early spring just before buds begin to swell. Never repot during extreme heat or cold. Secure the tree in its new pot using wire through the drainage holes to prevent movement while new roots establish.

Fertilizing

Seasonal Fertilizing Schedule for Callistemon citrinus
Season NPK Ratio Frequency Notes
Spring 10-10-10 Every 2 weeks Support new growth
Summer 10-10-10 Every 2 weeks Sustain vigor
Autumn 0-10-10 Every 3–4 weeks Harden off for winter
Winter None — No feeding during dormancy

Feed with balanced fertilizer from early spring through summer. Reduce nitrogen from late summer to encourage flower bud set. A phosphorus-emphasis fertilizer in late summer promotes the following spring's flower display. Stop feeding in autumn. The species is not a heavy feeder — moderate nutrition produces the best results.

Flushing salts: Water thoroughly several times in succession once per month during the growing season to flush accumulated fertilizer salts from the substrate. Salt buildup damages fine feeder roots and impairs water uptake.

Light & Placement

Classification: Outdoor bonsai — requires outdoor growing conditions with full sun exposure.

Full sun — a minimum of six hours of direct sun daily is required for the dense flower production that is the species' primary value. Cold-hardy to USDA zone 8-9. In cooler climates, greenhouse overwintering is needed. The species suits warm outdoor conditions in California, the Mediterranean, and Southern Australia. Summer heat does not cause problems — the species is naturally adapted to hot Australian summers.

Seasonal Placement Guide

Spring: New growth flushes; begin feeding with balanced fertilizer; prune to maintain shape as new growth extends. Summer: Regular watering; olive and Mediterranean species tolerate heat and some drought; protect boxwood from sunburn. Autumn: Reduce feeding; camellia buds swell for winter bloom; prepare cold-sensitive species for winter protection. Winter: Protect subtropical species from frost; olive trees need cool but frost-free conditions; camellia blooms in late winter. Boxwood and holly tolerate moderate cold.

Seasonal Care

Spring Summer Autumn Winter
Seasonal Care Calendar for Callistemon citrinus
Season Watering Feeding Key Tasks
Spring Increasing Resume / increase Repotting, structural pruning, wiring
Summer Maximum Regular biweekly Maintenance pruning, pinching, pest watch
Autumn Decreasing Reduce / stop Wiring, structural work, winter preparation
Winter Minimal None (dormancy) Protect roots, plan next season

Spring: Main flowering display — enjoy without pruning during this period. Early summer: Post-bloom pruning is the critical shaping window. Summer: New growth development, monitor for pests, light feeding. Autumn: Reduce feeding, admire persistent seed capsule rings. Winter: Frost protection in zones 8 and colder, minimal watering.

Group Seasonal Guide

Spring: New growth flushes; begin feeding with balanced fertilizer; prune to maintain shape as new growth extends. Summer: Regular watering; olive and Mediterranean species tolerate heat and some drought; protect boxwood from sunburn. Autumn: Reduce feeding; camellia buds swell for winter bloom; prepare cold-sensitive species for winter protection. Winter: Protect subtropical species from frost; olive trees need cool but frost-free conditions; camellia blooms in late winter. Boxwood and holly tolerate moderate cold.

Pests & Diseases

Pest & Disease Watch Common Pests • Spider mites: stippled, bronzed foliage • Scale insects: brown bumps on stems • Aphids: clustered on new growth • Fungal disease: spots, dieback Prevention: • Good air circulation • Proper watering, avoid waterlogging
Common pests for Callistemon citrinus: scale insects, mealybugs, spider mites

Scale insects particularly favor the rough bark of old Callistemon — inspect and treat with horticultural oil. Sawfly larvae (Callistemon sawfly) can strip entire branches of leaves — treat with Bacillus thuringiensis. Witches' broom gall mite causes abnormal dense growth at shoot tips — cut out affected sections. Root rot in persistently waterlogged conditions despite the species' relative tolerance.

Group Pest Guide

Olive moth larvae mine leaves and bore into fruit; apply appropriate insecticide. Boxwood blight causes dark leaf spots and rapid defoliation; fungicide treatment and removal of affected growth is essential. Boxwood leafminer creates blistered leaves; treat with systemic insecticide in spring. Scale insects affect most broadleaf evergreens; treat with horticultural oil. Holly leaf miner creates serpentine trails in leaves; systemic insecticide in spring is effective. Sooty mold from honeydew-producing pests is common; treat the underlying pest infestation.

IPM Quick Reference
Pest/Disease Identification Treatment
Scale Insects Brown or white bumps on stems/branches Horticultural oil, systemic insecticide, manual removal
Mealybugs White cottony masses in leaf axils Rubbing alcohol on cotton swab, systemic insecticide
Spider Mites Fine webbing, stippled/bronzed foliage Miticide spray, increase humidity, neem oil

Propagation

From Seed 3–5 years to training size From Cutting Roots in 4–12 weeks Air Layering Instant thick trunk in 8–12 weeks
Propagation methods for Callistemon citrinus: Cuttings, Seeds

Semi-hardwood cuttings in late summer root with IBA hormone at 20-24°C within six to eight weeks. Named cultivars must be propagated vegetatively. Seed germinates readily after brief heat treatment (simulate fire) — soaking in warm water for twenty minutes achieves this without actual fire. Seedlings take several years to reach flowering size.

Group Propagation Guide

Olive propagates from semi-hardwood cuttings or by salvaging ancient olive wood with some living cambium. Boxwood cuttings root readily in summer within 6–8 weeks. Privet is extremely easy from cuttings taken at almost any time during the growing season. Holly propagates from semi-hardwood cuttings under mist; berried varieties require both male and female plants. Camellia is typically grafted for named cultivars or propagated from semi-hardwood cuttings in summer. Mediterranean species like myrtle root easily from cuttings.

Propagation Methods Comparison
Method Timeline Notes
Cuttings Variable Consult species-specific guides
Seeds Variable Consult species-specific guides

Size Classification

Mame 15+ cm Shohin 20+ cm Chuhin 46+ cm Omono 76+ cm
Shohin (15–20 cm)Chuhin (25–46 cm)Omono (46–76 cm)

Most effective at medium to large scale (40-80 cm) where the 6-10 cm flower spikes remain in proportion with the composition. The bottlebrush flowers are so distinctive and large that very small bonsai compositions struggle to display them proportionally. Medium scale allows the seed capsule rings along branches to be a visible design feature.

Japanese Bonsai Size Classification
Keshitsubo (3–8 cm)
Shito (5–10 cm)
Mame (5–15 cm)
Shohin (15–20 cm) ✅
Komono (15–25 cm)
Chuhin (25–46 cm) ✅
Omono (46–76 cm) ✅
Dai (76–122 cm)
Imperial (122+ cm)

Varieties & Cultivars

Callistemon citrinus 'Splendens' is the most widely grown cultivar — brilliant scarlet bottlebrushes. 'White Anzac' has white flower spikes. 'Candy Pink' has pink flowers. 'Little John' is a dwarf, compact form with smaller flower spikes — useful for smaller-scale bonsai. The closely related Callistemon viminalis (weeping bottlebrush) has strongly pendulous branches suited to cascade style.

Group Varieties

Buxus harlandii (Harland boxwood) is the premier bonsai boxwood with naturally small leaves. Olea europaea (olive) develops ancient-looking trunks and tolerates heavy styling. Ligustrum (privet) grows vigorously with small leaves. Ilex (holly) species offer dark glossy foliage and occasional berries; I. crenata has tiny leaves. Myrtus communis (common myrtle) has fragrant foliage and white flowers. Camellia sasanqua is more suited to bonsai than C. japonica due to smaller flowers and leaves. Serissa foetida (snow rose) has tiny leaves and flowers but is temperamental.

Buying Guide & Display

Native plant nurseries and general garden centers in warm-climate regions stock multiple Callistemon cultivars at modest prices. Select plants with genuine trunk caliper and visible bark furrowing. 'Little John' dwarf selections provide compact material for smaller-scale bonsai. Verify cold hardiness for your specific climate — provenance makes a significant difference in cold tolerance.

Buying Checklist for Callistemon citrinus
Check What to Look For
Trunk Good taper, interesting movement, no reverse taper at graft union
Nebari Even radial root spread, no circling or crossing roots
Roots Healthy white root tips visible, no root rot smell
Branches Well-placed primary branches, no large scars or stubs
Health Vibrant foliage color, no pests, firm bark, strong buds

Troubleshooting

Sparse flowering despite adequate light indicates either pruning at the wrong time (removing developing flower buds) or excessive nitrogen suppressing reproductive growth — adjust both. Leaf bronzing in winter in exposed positions is normal cold-weather pigmentation and not a disease sign. Witches' broom gall causes dense abnormal growth at shoot tips — cut out affected sections promptly before the gall spreads. Failure to back-bud after heavy pruning indicates the pruning went too deep into bare wood — cut back to the nearest foliage-bearing branch and feed consistently to stimulate recovery.

Common Problems

Olive leaves dropping: Cold stress or overwatering. Olive is Mediterranean; provide cool, dry winter conditions.
Boxwood leaves turning brown: Boxwood blight or winter burn. Inspect for black leaf spots; protect from cold, drying winds.
Privet growing too vigorously: Normal for privet. Frequent pinching and pruning are essential to maintain bonsai proportions.
Holly losing lower leaves: Insufficient light reaching lower branches. Thin upper canopy; maintain good branch structure.

Display & Exhibition

Display during the peak flowering period — the crimson bottlebrush spikes against the narrow-leaved foliage are visually unmistakable and immediately impactful. A heavy, unglazed terracotta or grey rectangular container suits the rough bark and strong flowering character. The seed capsule bead rings along older branches add textural interest during the non-flowering season.

Group Display Guide

Broadleaf evergreen bonsai provide year-round display options. Olive bonsai are displayed to emphasize their ancient, gnarled trunks and silver-green foliage. Boxwood is showcased for its dense, refined pad structure. A Mediterranean-themed display with stone accents suits olive and myrtle. Camellia is displayed during its winter bloom season, often paired with a seasonal scroll. Glazed pots in subtle greens or blues complement the evergreen foliage. The display should emphasize the natural character of the species.

Frequently Asked Questions

How often should I water my Crimson Bottlebrush bonsai?

Water your Crimson Bottlebrush bonsai when the top layer of soil begins to dry. During summer this may be daily or even twice daily for outdoor trees; in winter, reduce frequency significantly. Always water thoroughly until water runs from the drainage holes, then allow the soil to partially dry before the next watering.

Can I keep Crimson Bottlebrush bonsai indoors?

No. Crimson Bottlebrush is an outdoor species that requires natural sunlight, air circulation, and seasonal temperature changes including winter dormancy. Growing it permanently indoors will weaken and eventually kill the tree.

What bonsai styles suit Crimson Bottlebrush?

Crimson Bottlebrush is particularly well-suited to Moyogi, Shakan, Multi Trunk. Choose a style that complements the existing trunk movement and natural growth habit of your individual tree.

When should I repot my Crimson Bottlebrush bonsai?

Repot Crimson Bottlebrush every 2 years in early spring, just before the buds begin to swell. Signs that repotting is needed include water sitting on the surface without soaking in, roots circling inside the pot, or reduced vigor despite proper care.

How do I wire Crimson Bottlebrush bonsai?

Use aluminum wire for Crimson Bottlebrush. Apply wire at a 45-degree angle, with wire thickness approximately one-third of the branch diameter. Wire during the dormant season when possible, and check wires every 2–4 weeks during the growing season to prevent them cutting into the bark.

Is Crimson Bottlebrush good for beginners?

Yes, Crimson Bottlebrush is an excellent choice for beginners. It is forgiving of occasional care mistakes and responds well to basic bonsai techniques.

What soil mix should I use for Crimson Bottlebrush?

Use a well-draining bonsai mix for Crimson Bottlebrush. The key principle is excellent drainage combined with adequate moisture retention. Never use standard garden soil or purely organic potting mix for bonsai, as these compact over time and suffocate roots.

How do I promote ramification on Crimson Bottlebrush?

Ramification on Crimson Bottlebrush is rated as medium. Promote finer branching through repeated cycles of growing and cutting back. Allow shoots to extend 4–6 nodes, then prune back to 1–2 nodes. Over multiple growing seasons, this creates increasingly dense and refined branch structure.

When is the best time to prune Crimson Bottlebrush?

Perform structural pruning on Crimson Bottlebrush during the dormant season (late autumn to late winter) when the tree's energy reserves are in the roots. Maintenance pruning and pinching of new growth can be done throughout the growing season to maintain shape and promote density.

How cold-hardy is Crimson Bottlebrush?

Crimson Bottlebrush should be protected from temperatures below 10°C. Hardy in USDA zones 9-11. Protect container roots by placing in an unheated garage, cold frame, or burying the pot in ground soil during extreme cold.

Quick Reference Summary

Scientific Name Callistemon citrinus
Common Name Crimson Bottlebrush
Family Myrtaceae
Origin Australia
Group Broadleaf Evergreen
Indoor/Outdoor Outdoor
Difficulty Beginner
Bonsai Tradition Modern
Wiring Suitability good
Wire Type aluminum
Ramification medium
Leaf/Needle Reduction good
Nebari Development easy
Deadwood Suitability not_suitable
Substrate —
Repotting Frequency Every 2 years
USDA Zones 9-11
Retour au blog