Thuja plicata: Complete Care & Growing Guide
Thuja plicata
Thuja plicata
1. Introduction & Taxonomy
Thuja plicata (Cupressaceae, order Pinales) is a conifer native to Pacific Northwest of North America. Thuja plicata is notable for reaching an impressive 70 m in height.
Thuja plicata is a large evergreen coniferous tree in the family Cupressaceae, native to the Pacific Northwest of North America. Its common name is western redcedar. It is also less commonly called western red cedar, pacific red cedar, giant arborvitae, western arborvitae, just cedar, giant cedar, or shinglewood. It is not a true cedar of the genus Cedrus. T. plicata is the largest species in the genus Thuja, growing up to 70 metres (230 ft) tall and 7 m (23 ft) in diameter. It mostly grows in areas that experience a mild climate with plentiful rainfall, although it is sometimes present in drier areas on sites where water is available year-round, such as wet valley bottoms and mountain streamsides. The species is shade-tolerant and able to establish in forest understories and is thus considered a climax species. It is a very long-lived tree, with some specimens reaching ages of well over 1,000 years.
Taxonomic Classification
Habitat and Distribution
Thuja plicata is native to Pacific Northwest of North America. This species inhabits environments typical of its genus, from montane forests to rocky outcrops and coastal areas.
Botanical Note: The genus Thuja contains 5 species of evergreen trees with flattened, scale-like foliage. They are widely used in horticulture for hedging and screening. The aromatic wood is highly rot-resistant and valued for outdoor construction. Thuja sutchuenensis from China was thought extinct until rediscovered in 1999.
Native Range & Distribution Map
The map below shows the native range and notable cultivation regions for Thuja plicata.
2. Biology & Morphology
Growth Form & Architecture
Thuja plicata is an evergreen conifer with needle-like leaves typical of the conifer lineage. It develops the characteristic conical or pyramidal form shared by many conifers, with a straight trunk and tiered branching.
Reproductive Structures
As a gymnosperm, Thuja plicata reproduces via seeds borne on the scales of cones (or modified structures). Male (pollen) cones are typically small and short-lived, releasing clouds of wind-borne pollen in spring. Female (seed) cones are larger and may take 1-3 years to mature. The woody seed cones open when mature to release winged seeds.
Key Characteristics
- Height: 21-70 m
- Growth Habit: Pyramidal Evergreen
- Growth Rate: Moderate under optimal conditions
- Foliage: Evergreen
Ancient Lineage: Conifers are among the oldest living plant groups, with fossils dating back over 300 million years to the Carboniferous period. They predate flowering plants by roughly 200 million years. Despite their ancient origins, conifers remain ecologically dominant in many biomes, particularly boreal forests, montane regions, and the Southern Hemisphere's cool temperate zones.
3. Reproduction & Propagation
The primary propagation method for Thuja plicata: Seeds or semi-ripe cuttings.
Seed Propagation
Seeds of Thuja plicata should be sown fresh when possible. Cold stratification (4-12 weeks) generally improves germination. Sow in well-draining seed mix and maintain cool, moist conditions.
Vegetative Propagation
- Semi-ripe Cuttings: Take 10-15 cm cuttings of current season's growth in late summer or autumn. Wound the base, dip in rooting hormone, and insert in a mix of peat and perlite under mist or humidity dome.
- Success Rate: Generally good (70-90%) for yews, junipers, and arborvitae. Maintain bottom heat of 18-20°C.
Seed Stratification: Most temperate conifers require cold stratification — a period of cool, moist conditions that mimics winter and breaks seed dormancy. Place seeds in moist vermiculite or peat in a sealed bag in the refrigerator (2-5°C) for the recommended period before sowing.
Propagation Tips: (1) Sow conifer seeds fresh when possible — viability declines with storage. (2) Use a well-draining, slightly acidic seed mix. (3) Maintain cool temperatures during germination. (4) Protect seedlings from damping-off with good ventilation. (5) Transplant when large enough to handle, being careful not to disturb the taproot.
4. Cultivation Requirements
Soil / Substrate
Well-draining, slightly acidic to neutral soil (pH 5.0-7.0). Most conifers prefer deep, loamy soil but tolerate a wide range of substrates. Good drainage is essential, as waterlogging causes root rot.
Watering
Water regularly during the first 2-3 years to establish a deep root system. Once established, most conifers are moderately drought-tolerant. Water deeply during prolonged dry spells, especially in summer. Avoid overwatering, which can lead to root rot.
Light Requirements
Full sun for optimal growth. Provide at least 6 hours of direct sunlight daily.
Temperature
- Optimal Growth: 15–30°C (59–86°F)
- Minimum Tolerance: -5°C (23°F)
- USDA Hardiness: Zones 8-11
Fertilization
Apply a slow-release, acidifying fertilizer formulated for evergreens in early spring. Most conifers are light feeders and do not require heavy fertilization. Avoid high-nitrogen fertilizers, which promote soft, frost-susceptible growth. An annual application of sulphur or acidifying mulch helps maintain optimal soil pH.
Common Cultivation Mistake: Planting too deep is a frequent cause of conifer decline. The root flare (where the trunk meets the roots) should be at or slightly above soil level. Buried root flares lead to bark rot, suffocated roots, and eventual death. Also avoid piling mulch against the trunk ('volcano mulching').
5. Diseases & Pests
No major disease issues reported for Thuja plicata. Good drainage and air circulation prevent most problems.
Major Problems
Root Rot (Phytophthora / Armillaria)
The most common cause of conifer death in cultivation. Caused by waterlogged soil and fungal infection. Symptoms include yellowing, browning, and progressive dieback. Prevention: ensure excellent drainage and avoid overwatering.
Needle Blight / Cast
Various fungal diseases cause needle browning, often starting from the base of the tree. Improve air circulation, remove fallen debris, and apply copper-based fungicide in severe cases.
Common Pests
- Bark Beetles — Bore into trunks and branches of stressed trees. Keep trees healthy through proper watering and avoid wounding. Remove and destroy infested branches.
- Spider Mites — Cause needle yellowing and bronzing, especially in dry conditions. Spray with water to dislodge, or use miticide for heavy infestations.
- Adelgids / Woolly Aphids — White, cottony masses on needles and bark. Treat with horticultural oil or insecticidal soap.
- Scale Insects — Brown bumps on needles and bark. Treat with horticultural oil during the crawler stage.
Prevention: (1) Choose species appropriate to your climate and soil. (2) Plant in well-drained soil. (3) Avoid root disturbance and trunk wounds. (4) Maintain good air circulation. (5) Water during drought but do not overwater. Stressed conifers are far more susceptible to pest and disease attack.
6. Indoor Growing Guide
Thuja plicata is not ideally suited to long-term indoor culture, as most conifers require cool winter temperatures and high light levels. However, young specimens can be grown in containers on a bright patio or in a cold greenhouse.
Container Selection
Use a deep container with excellent drainage. Conifers develop deep root systems and resent sitting in waterlogged soil. Terracotta or concrete pots provide weight for stability and allow moisture to evaporate through the walls.
Indoor Light
Maximum light is essential. Place in the brightest window available (south-facing in the Northern Hemisphere). Most conifers need at least 6 hours of direct sunlight daily. Full-spectrum grow lights on a 14-hour timer can supplement natural light in winter.
Winter Requirements
Many temperate conifers require a cool dormancy period (0-10°C) in winter. Without this, they weaken and become susceptible to pests and diseases. An unheated garage, cold greenhouse, or sheltered outdoor position provides ideal winter conditions for container-grown conifers.
Bonsai Potential
Thuja plicata can potentially be trained as bonsai, though it is less commonly used than the classic conifer bonsai species.
Indoor Success Key: Cool temperatures and maximum light are the critical factors for indoor conifer success. Conifers are not tropical houseplants — they need fresh air, bright light, and cool winter conditions. A cool, bright conservatory or unheated porch is far more successful than a warm living room.
7. Landscape Use & Design
Thuja plicata provides year-round evergreen structure, windbreak capability, and habitat value in the landscape. Conifers are the backbone of many garden designs, providing winter interest when deciduous trees are bare.
Design Applications
- Specimen Tree: The natural form of many conifers — pyramidal, columnar, or spreading — creates beautiful focal points without pruning.
- Windbreak / Screen: Dense, evergreen conifers are ideal for creating year-round privacy screens and windbreaks that protect gardens from harsh weather.
- Foundation Planting: Dwarf and compact cultivars provide structure near buildings without growing too large.
- Rock Garden: Dwarf and prostrate conifers are essential elements of rock gardens and alpine plantings.
Companion Planting
Create stunning compositions by pairing with:
- Heathers & Heaths — acid-loving companions that share cultural needs
- Ornamental Grasses — textural contrast with conifer forms
- Rhododendrons & Azaleas — fellow acid-soil lovers with spring colour
- Deciduous Trees — conifers provide winter structure when deciduous partners are bare
- Ferns — natural woodland understorey beneath conifer canopy
- Ground Cover Plants — low-growing companions beneath taller conifers
Design Principle: Conifers provide the permanent evergreen framework of a garden. Place them first when designing, then add deciduous trees, shrubs, and perennials around them. The year-round presence of conifers ensures the garden never looks empty or formless, even in the depths of winter.
8. Cold Climate Strategies
Thuja plicata requires winter protection in climates colder than its rated hardiness zone. In marginal areas, choose sheltered, south-facing positions and apply protective mulch.
Hardiness Thresholds
- USDA Zones: 8-11
- Minimum Survival Temperature: -5°C (23°F)
Winter Protection
- Snow Load: Heavy, wet snow can break branches. Gently brush off accumulated snow from pyramidal species. Avoid shaking, which can cause branch snapping.
- Winter Burn: Evergreen needles can desiccate in cold, dry, windy weather when the ground is frozen. Apply anti-desiccant spray in late autumn. Water deeply before ground freezes.
- Mulching: Apply 8-10 cm of organic mulch around the root zone (not touching the trunk) to insulate roots from extreme cold and reduce freeze-thaw cycles.
- Container Plants: Protect containerized conifers from root freezing by insulating pots with bubble wrap or burlap, or sinking pots into the ground for winter.
Winter Survival Rule: The greatest cold-climate risk for conifers is not freezing itself but winter desiccation — when cold, dry winds remove moisture from needles faster than frozen roots can replace it. Watering deeply before the ground freezes and applying anti-desiccant spray are the most effective preventive measures.
Summary & Key Takeaways
Thuja plicata, is an impressive conifer reaching 70 m, native to Pacific Northwest of North America.
Key Points to Remember:
- Propagation: Seeds or semi-ripe cuttings
- Light: Full sun for most species
- Substrate: Well-draining, slightly acidic soil
- Watering: Regular during establishment; drought-tolerant once mature
- Hardiness: USDA Zones 8-11, minimum -5°C (23°F)
- Key Feature: Evergreen structure and year-round garden presence