Pinus nigra (Austrian Black Pine)

Pinus nigra (Austrian Black Pine) - Complete Bonsai Guide

Pinus nigra (Austrian Black Pine)

Complete bonsai care guide for Austrian Black Pine
🌳 Pine • Intermediate • Modern Tradition
19 min read
Pinus nigra bonsai illustration Artistic bonsai illustration of Pinus nigra, a pine species Pine • Pinaceae
🌳
Pine
☀️
Outdoor
🎯
Intermediate
🎨
Chokkan, Moyogi, Shakan
✅
Wiring: Good
📐
Chuhin, Omono
🚀
Modern Tradition
12345678910111213
USDA Zones 4–8
🌍
Southern Europe
12345678910111213 Monthly Bonsai Care Calendar J F M A M J J A S O N D Watering Feeding Pruning Repotting

Introduction

Pinus nigra Austrian Black Pine Quick Profile Family: Pinaceae Group: Pine Origin: Southern Europe Difficulty: Intermediate Tradition: Modern Growth: moderate Foliage: evergreen 🌳 Bonsai Overview

Pinus nigra, the European Black Pine, is a robust 2-needle pine native to southern Europe and Asia Minor, valued in bonsai for its dark, deeply furrowed bark, long dark needles, and extreme toughness. It tolerates poor soil, drought, urban pollution, and a wide range of climates, making it forgiving material for bonsai beginners. Collected specimens from Mediterranean mountains develop massive trunks with dramatic deadwood features.

Two needles per fascicle, 8-16 cm long, stiff, dark green, and straight or slightly curved. Bark is dark gray to almost black, deeply fissured into thick, irregular plates — the 'black' of the common name. Growth is vigorous and upright, with strong apical dominance. Terminal buds are large, cylindrical, and covered in whitish resin, resembling those of P. thunbergii. Cones are 5-8 cm, yellowish-brown, symmetrical.

Quick Facts
Common Name Austrian Black Pine Family Pinaceae
Origin Southern Europe Indoor/Outdoor Outdoor
Bonsai Tradition Modern Japanese Name —
Difficulty Intermediate Group Pine
Recommended Styles Chokkan (Formal Upright), Moyogi (Informal Upright), Shakan (Slanting), Bunjin (Literati)
Size Categories Chuhin (25–46 cm), Omono (46–76 cm)

History & Tradition

European black pine has become a staple of Mediterranean bonsai, particularly in Italy, Spain, and the Balkans. Italian bonsai master Andrea Meriggioli has produced world-class nigra bonsai from collected Corsican and Calabrian specimens. The species bridges European and Asian pine bonsai traditions, as its techniques overlap with both P. thunbergii and P. sylvestris. Yamadori collection from the Mediterranean mountains has produced some of the largest and most dramatic European pine bonsai.

About Pine Bonsai

Pines hold an exalted position in bonsai tradition, symbolizing longevity, endurance, and the connection between earth and sky. Japanese black pine (Kuromatsu) and Japanese white pine (Goyo-matsu) are the most revered species, with centuries-old specimens held as national treasures. Pine bonsai require a distinct two-flush decandling technique that separates them from all other bonsai species in terms of cultivation skill. The thick, fissured bark that develops over decades adds a powerful sense of age. Needle management through pulling, cutting, and seasonal timing controls vigor balance across the canopy. Pine bonsai demand full sun, excellent air circulation, and careful attention to mycorrhizal health in the root zone.

Botanical Profile

Foliage Detail Apex Midrib Base Taxonomy Kingdom: Plantae Family: Pinaceae Genus: Pinus Species: nigra Type: conifer Foliage: evergreen Bark: dark grey-brown, deeply furrowed Bonsai Characteristics Ramification: medium Leaf reduction: moderate Nebari: moderate Deadwood: good Wire type: copper Bark scarring: moderate
Taxonomy & Characteristics
Family Pinaceae Genus Pinus
Species nigra Plant Type conifer
Origin Southern Europe Growth Rate moderate
Foliage Type evergreen Bark Character dark grey-brown, deeply furrowed
Autumn Color Height Range 20-100

Subgenus Pinus, section Pinus — hard 2-needle pine. Closely related to P. thunbergii and sometimes confused with it. Native to southern Europe from Spain and Morocco through Italy, the Balkans, Turkey, and the Crimea. Multiple subspecies recognized: subsp. nigra (Austrian pine), subsp. laricio (Corsican pine), subsp. salzmannii (Pyrenean pine). Grows on limestone and calcareous soils in the wild, tolerating alkaline conditions better than most pines. The species name 'nigra' refers to the dark bark.

Common pests to watch for: pine needle scale, diplodia tip blight, sawflies

Bonsai Styles

Chokkan Moyogi Kengai Bunjin Fukinagashi Yose-ue
Recommended Styles for Pinus nigra
Style Japanese Name
Chokkan Formal Upright
Moyogi Informal Upright
Shakan Slanting
Bunjin Literati

Formal and informal upright styles suit the naturally strong, upright growth habit. The thick trunk and dark bark create a powerful, masculine impression in moyogi and chokkan. Literati (bunjin) works with slender collected specimens. Windswept is natural for Mediterranean cliff-dwelling specimens. The long needles are challenging for small bonsai — chuhin and medium sizes are most convincing.

Style suitability: The styles listed above are particularly well-suited to the growth habit, branch structure, and natural character of Pinus nigra. Select a style that complements the tree's existing trunk movement and branch placement.

Group Style Guide

Formal upright (chokkan) is the most classical pine style, representing the ideal of a tree growing unimpeded in open ground. Informal upright (moyogi) is the most commonly practiced pine style, with gentle trunk curves and balanced branch placement. Literati (bunjin) pine is highly regarded in Japanese tradition, representing trees shaped by harsh mountain winds. Twin trunk (sokan) and clump (kabudachi) styles work well with species that naturally produce multiple leaders. Pines are less suited to cascade styles due to their upward growth habit, though exceptions exist among Japanese white pine.

Trunk & Nebari

Trunk & Nebari Jin Shari Cross-Section Annual growth rings Taper Guide Ideal trunk taper: 1:6 ratio base width to height. Nebari: moderate Deadwood: good Bark: dark grey-brown, deeply furrowed
Trunk Characteristics
Nebari Development moderate Deadwood Suitability good
Bark Scarring Risk moderate Bark Character dark grey-brown, deeply furrowed

The dark, deeply fissured bark is the defining ornamental feature — it develops relatively early (10-15 years in pots). Nebari development is good with standard root pruning techniques at each repotting. Ground-growing produces rapid trunk thickening due to the species' vigorous growth. Jin and shari are effective — the dense heartwood is moderately resistant to decay. Large trunk wounds compartmentalize slowly — make major cuts in stages.

Deadwood Techniques

Black pine develops natural deadwood from drought stress, lightning, and fire in Mediterranean habitats. The dense heartwood is moderately durable and holds carved features well. Shari on collected specimens often follows fire scars or drought-killed bark strips. Apply lime sulfur 2-3 times per year. The dark living bark contrasts strongly with bleached deadwood, creating dramatic visual impact.

Bark scarring risk: moderate — Take extra care when wiring Pinus nigra. Use raffia or protective wrapping on thick bends, and check wires frequently to prevent them cutting into the bark.

Wiring & Shaping

Wiring Technique 45° spacing Wiring Tips Wire type: copper Suitability: good Bark scarring risk: moderate • Wire at 45° angle to branch • Wire thickness = 1/3 branch diameter • Remove before wire bites into bark • Use raffia protection on thick bends
Wiring suitability: good • Wire type: copper (1–3 mm annealed copper)

Wire with annealed copper, 1.0-4.0 mm gauge. Branches are stiff and strong, requiring heavier wire than Japanese pines. Apply in autumn to winter; branches set in 12-18 months. The thick bark provides some protection against wire scarring, but check monthly. Guy wires and clamps are often necessary for repositioning thick branches on mature trees. Raffia wrapping recommended for branches over 10 mm diameter.

Wiring Reference for Pinus nigra
Wire Type Bark Scarring Risk Best Season
Aluminum Lower (softer wire) Late autumn / early spring
Annealed copper Higher (holds shape better) Late autumn / early spring
Wire removal timing: Check wired branches every 2–4 weeks during the growing season. Remove wire before it begins to bite into the bark. On fast-growing species like Pinus nigra, wire marks can become permanent scars within a single growing season.

🌍 Distribution Map

Native origin: Southern Europe

Native Origin
Range Boundary

Pruning & Pinching

Pruning Guide Before After Pruning Principles • Maintenance prune during growing season • Structural prune during dormancy • Cut to a bud facing the desired direction • Seal large cuts with wound paste • Remove crossing and downward branches • Balance vigor between strong and weak areas • Ramification: medium
Pruning Characteristics
Ramification Quality medium Leaf/Needle Reduction moderate

European black pine can be decandled in summer using the same technique as P. thunbergii, but only in warm climates where the growing season is long enough for a second flush (zones 7-9). In cooler climates (zones 4-6), use spring candle pinching instead: remove 1/2 to 2/3 of strong candles. Needle pulling in autumn: the long needles need aggressive thinning — leave 5-8 pairs per shoot. The long needles (8-16 cm) are the primary challenge for bonsai proportionality — consistent reduction work is needed.

Expert Tips: Needle reduction is the primary challenge. Consistent low-nitrogen feeding, full sun, and spring candle pinching gradually reduce needle length over 3-5 years from 12-16 cm down to 6-8 cm. Decandling in warm climates produces second-flush needles 40-60% shorter than first-flush growth. The thick bark develops attractive plate patterns earlier than most European pines — this is a selling point of the species. Cross-pollination with P. thunbergii produces vigorous hybrids used in some bonsai nurseries.

Watering

Watering & Drainage Mesh Drainage Substrate Moss Watering Rules • Water thoroughly until it drains from holes • Water when soil surface begins to dry • Never let bonsai sit in standing water • Adjust frequency for season and weather • Use a fine-nozzle watering can • Morning watering is preferred • Rainwater or dechlorinated water is best
Indoor/Outdoor classification: Outdoor — this affects watering frequency, as outdoor bonsai dry out faster in sun and wind.

Drought-tolerant once established, but bonsai specimens need regular watering. Allow soil to dry between waterings more than for Japanese pines. Daily in summer, every 4-7 days in winter. Tolerates brief drought without damage — forgiving of occasional missed waterings. Avoid waterlogged conditions, especially in winter.

Overwatering vs. underwatering: Yellow leaves and soft, dark roots indicate overwatering and root rot. Crisp, dry leaves and lightweight soil indicate underwatering. Both conditions stress the tree — consistent, attentive watering is the foundation of successful bonsai care.

Soil & Repotting

Soil & Repotting Drainage mesh Lava rock Akadama mix Sphagnum moss Substrate Details Mix: Conifer Mix (Akadama/Pumice/Lava) Repot every 3 years Root pruning: moderate • Use particle sizes 2–6 mm • Never use garden soil in bonsai • Repot in spring before bud break • Secure tree with wire through drain holes
Substrate & Repotting Guide
Substrate Type Conifer Mix (Akadama/Pumice/Lava)
Repotting Frequency Every 3 years
Root Pruning Tolerance moderate

Use well-draining mix: 50% pumice, 30% akadama or calcined clay, 20% lava rock, sieved to 3-6 mm. Tolerates a wider range of substrates than Japanese pines, including lime-containing soils. Repot every 3-5 years in mid to late spring. Less dependent on mycorrhizae than other pines, but retaining some old soil is still advisable. The vigorous root system fills pots faster than mugo or sylvestris.

Group Soil Recipes

Pine substrate must be extremely well-draining to support mycorrhizal fungi: 50% akadama (or kiryu for black pine), 25% pumice, 25% lava rock. Japanese black pine benefits from a coarser mix with larger particle sizes (4–8 mm) to encourage strong root growth. White pines prefer slightly finer particles. Never add organic matter to pine soil. Repot every 3–5 years, timing carefully to coincide with candle elongation in spring. Preserve white mycorrhizal threads visible on healthy roots during repotting.

Repotting timing: Repot Pinus nigra in early spring just before buds begin to swell. Never repot during extreme heat or cold. Secure the tree in its new pot using wire through the drainage holes to prevent movement while new roots establish.

Fertilizing

Seasonal Fertilizing Schedule for Pinus nigra
Season NPK Ratio Frequency Notes
Spring Low N Every 2 weeks Support new growth
Summer Low N Every 2 weeks Sustain vigor
Autumn 0-10-10 Every 3–4 weeks Harden off for winter
Winter None — No feeding during dormancy

Moderate to heavy feeder. Balanced organic (5-5-5) from April to June and September to November. Can tolerate stronger fertilization than many pines without adverse effects. 4-6 cakes per medium tree. Autumn feeding is important for needle shortening in the following year. Low-nitrogen spring feeding helps limit the already-long needle growth.

Flushing salts: Water thoroughly several times in succession once per month during the growing season to flush accumulated fertilizer salts from the substrate. Salt buildup damages fine feeder roots and impairs water uptake.

Light & Placement

Classification: Outdoor bonsai — requires outdoor growing conditions with full sun exposure.

Full sun — minimum 6 hours, ideally 8+. Extremely sun-loving species. Heat tolerant to 40 C with adequate watering. No shade protection needed in any temperate or Mediterranean climate. Wind exposure is beneficial for compact growth. Thrives in hot, dry conditions that would stress Japanese pines.

Dormancy required: Pinus nigra is an outdoor species that requires a cold winter dormancy period. Growing this species permanently indoors will eventually weaken and kill the tree. Winter temperatures between 0°C and 7°C for 6–12 weeks are essential.

Seasonal Placement Guide

Spring: Candle management is critical — decandling of black pine occurs in early summer, not spring; white pine candles are shortened by pinching. Summer: Full sun and excellent air circulation; apply organic fertilizer heavily from late summer through autumn to build strength. Autumn: This is the primary feeding season for pines; needle pulling to balance energy; structural wiring. Winter: Protect from sustained hard freezes; pines tolerate cold well but roots in containers are vulnerable; reduce watering. Repotting occurs during spring candle elongation.

Seasonal Care

Spring Summer Autumn Winter
Seasonal Care Calendar for Pinus nigra
Season Watering Feeding Key Tasks
Spring Increasing Resume / increase Repotting, structural pruning, wiring
Summer Maximum Regular biweekly Maintenance pruning, pinching, pest watch
Autumn Decreasing Reduce / stop Wiring, structural work, winter preparation
Winter Minimal None (dormancy) Protect roots, plan next season

Spring: Pinch or prepare for decandling; remove excess candles at congested nodes. Summer: Decandle in warm climates (late June-July); maintain watering in hot weather. Autumn: Pull old needles aggressively, wire, fertilize heavily. Winter: Hardy to -25 C in ground; protect pots from hard freezes below -10 C.

Group Seasonal Guide

Spring: Candle management is critical — decandling of black pine occurs in early summer, not spring; white pine candles are shortened by pinching. Summer: Full sun and excellent air circulation; apply organic fertilizer heavily from late summer through autumn to build strength. Autumn: This is the primary feeding season for pines; needle pulling to balance energy; structural wiring. Winter: Protect from sustained hard freezes; pines tolerate cold well but roots in containers are vulnerable; reduce watering. Repotting occurs during spring candle elongation.

Winter dormancy: Outdoor bonsai species require a natural winter dormancy period. Do not bring them into heated rooms. Protect container roots from sustained hard freezes by placing in an unheated garage, cold frame, or burying the pot in garden soil.

Pests & Diseases

Pest & Disease Watch Common Pests • Spider mites: stippled, bronzed foliage • Scale insects: brown bumps on stems • Aphids: clustered on new growth • Fungal disease: spots, dieback Prevention: • Good air circulation • Proper watering, avoid waterlogging
Common pests for Pinus nigra: pine needle scale, diplodia tip blight, sawflies

Diplodia tip blight (Diplodia sapinea) is the most serious disease, causing brown, stunted candles in wet springs. Preventive fungicide (copper or thiophanate-methyl) applied as candles extend in spring reduces infection. Pine processionary moth (Thaumetopoea pityocampa) is problematic in Mediterranean regions — remove nests carefully (urticating hairs). Needle scale and spider mites: standard treatment with dormant oil and miticides. Generally robust and less disease-prone than Japanese pine species.

Group Pest Guide

Pine needle scale appears as white elongated bumps on needles; treat with horticultural oil in dormant season. Red spider mites cause yellowing needles; increase humidity and apply miticide. Pine wilt disease (nematode-transmitted) is fatal and spreading globally; infected trees must be destroyed. Needle cast fungi cause premature needle drop; improve air circulation and treat with fungicide. Diplodia tip blight kills new candles; prune infected growth. Pine bark beetles attack stressed trees; maintain vigor through proper watering and feeding.

IPM Quick Reference
Pest/Disease Identification Treatment
Pine Needle Scale Check foliage and stems Consult specialist resources
Diplodia Tip Blight Check foliage and stems Consult specialist resources
Sawflies Check foliage and stems Consult specialist resources

Propagation

From Seed 3–5 years to training size From Cutting Roots in 4–12 weeks Air Layering Instant thick trunk in 8–12 weeks
Propagation methods for Pinus nigra: Seeds, Grafting

Seeds germinate after 60-90 days cold stratification. Germination rate is high (70-90%). Seedlings are vigorous — reaching workable trunk diameter in 3-5 years in the ground. Grafting is used for subspecies and regional variants onto nigra seedling rootstock. Cuttings are difficult; seed is the primary propagation method for the species type. Air layering is slow but possible.

Group Propagation Guide

Pine propagation from seed is the traditional method, as cuttings rarely root successfully. Fresh seed requires 60–90 days cold stratification before spring sowing. Seedlings reach trainable size in 3–5 years. Grafting is widely used, particularly for Japanese white pine, which is commonly grafted onto vigorous black pine rootstock for improved vigor. Air layering is occasionally possible on young, vigorous branches. Field-growing seedlings for 5–10 years before potting produces superior trunk development. Pine propagation requires patience; there are no shortcuts to developing quality material.

Propagation Methods Comparison
Method Timeline Notes
Seeds Variable Consult species-specific guides
Grafting Spring, during sap flow Named cultivars; skilled technique

Size Classification

Mame 15+ cm Shohin 20+ cm Chuhin 46+ cm Omono 76+ cm
Chuhin (25–46 cm)Omono (46–76 cm)

Best at chuhin (25-45 cm) and medium (45-70 cm) sizes where the long needles are less disproportionate. Shohin is challenging due to the long needles — multiple years of reduction work are needed. Large display specimens (70+ cm) with mature bark and deadwood are impressive exhibition trees. Mame is impractical due to the inherently long needles.

Japanese Bonsai Size Classification
Keshitsubo (3–8 cm)
Shito (5–10 cm)
Mame (5–15 cm)
Shohin (15–20 cm)
Komono (15–25 cm)
Chuhin (25–46 cm) ✅
Omono (46–76 cm) ✅
Dai (76–122 cm)
Imperial (122+ cm)

Varieties & Cultivars

Subsp. laricio (Corsican Pine) — treated separately below, with naturally shorter needles than the type. Subsp. salzmannii (Pyrenean Pine) — slow-growing with compact habit, good yamadori material. 'Hornibrookiana' — dwarf form with shorter needles, suitable for smaller bonsai. 'Bright Eyes' — compact dwarf with very short needles (3-4 cm), excellent for shohin.

Group Varieties

Japanese black pine (Pinus thunbergii, Kuromatsu) is the most important bonsai pine, with thick bark, long needles, and powerful trunk character. Japanese white pine (P. parviflora, Goyo-matsu) has five-needle clusters and softer character. Japanese red pine (P. densiflora, Akamatsu) offers reddish bark and elegant form. Scots pine (P. sylvestris) is the premier European bonsai pine. Mugo pine (P. mugo) stays naturally compact. Ponderosa pine (P. ponderosa) is a favorite North American species. Cork-bark black pine is prized for its deeply fissured trunk.

Buying Guide & Display

Nursery stock is inexpensive and widely available. Select specimens with low branching and some trunk movement — avoid straight, pole-like trees. Collected specimens from the Mediterranean mountains are premium material but require 2-3 years recovery. Check for Diplodia damage: brown, stunted tips on candles indicate active infection. Trees grown in alkaline soil do not need acidifying treatment — the species tolerates lime naturally.

Buying Checklist for Pinus nigra
Check What to Look For
Trunk Good taper, interesting movement, no reverse taper at graft union
Nebari Even radial root spread, no circling or crossing roots
Roots Healthy white root tips visible, no root rot smell
Branches Well-placed primary branches, no large scars or stubs
Health Vibrant foliage color, no pests, firm bark, strong buds

Troubleshooting

Long needles disproportionate to tree size are the most common aesthetic problem — patience and consistent technique required. Diplodia causes brown, short candles in spring — prune affected growth and spray preventively. Yellow needles across the tree may indicate chlorosis from overly acidic soil — this species prefers neutral to slightly alkaline pH. Wire cutting into thick bark is less visible than on smooth-barked pines but still creates permanent scars at depth. Resin bleeding from cuts is heavy in spring — avoid major pruning during active sap flow.

Common Problems

Needles yellowing uniformly: Likely nutrient deficiency or root problems. Check root health; increase fertilizer frequency.
Elongated weak needles: Insufficient light or excessive nitrogen. Move to full sun; reduce spring fertilizer.
Loss of lower branches: Pines prioritize apical growth. Redirect energy by reducing upper canopy vigor through decandling.
White cottony masses on bark: Pine adelgid or woolly aphid. Treat with systemic insecticide; strong infestations need professional products.

Display & Exhibition

Display in large, unglazed, dark-colored pots that match the dark bark character. Rectangular pots in dark brown or charcoal emphasize the masculine strength. Accent with Mediterranean-inspired plants: small grasses, thyme, or stone accent. The dark bark and long needles create a bold, dramatic presentation.

Group Display Guide

Pine bonsai occupy the highest position of honor in formal Japanese displays, placed centrally in the tokonoma alcove. The display stand should be substantial, matching the strength of the tree. A simple companion plant such as winter grass or small chrysanthemum provides seasonal context. The front of the tree faces the viewer with the first branch extending toward them, creating depth. Exhibition-quality pines show decades of refinement in their needle management and bark development. Clean the pot and remove any moss discoloration before display.

Frequently Asked Questions

How often should I water my Austrian Black Pine bonsai?

Water your Austrian Black Pine bonsai when the top layer of soil begins to dry. During summer this may be daily or even twice daily for outdoor trees; in winter, reduce frequency significantly. Always water thoroughly until water runs from the drainage holes, then allow the soil to partially dry before the next watering.

Can I keep Austrian Black Pine bonsai indoors?

No. Austrian Black Pine is an outdoor species that requires natural sunlight, air circulation, and seasonal temperature changes including winter dormancy. Growing it permanently indoors will weaken and eventually kill the tree.

What bonsai styles suit Austrian Black Pine?

Austrian Black Pine is particularly well-suited to Chokkan, Moyogi, Shakan. Choose a style that complements the existing trunk movement and natural growth habit of your individual tree.

When should I repot my Austrian Black Pine bonsai?

Repot Austrian Black Pine every 3 years in early spring, just before the buds begin to swell. Signs that repotting is needed include water sitting on the surface without soaking in, roots circling inside the pot, or reduced vigor despite proper care.

How do I wire Austrian Black Pine bonsai?

Use copper wire for Austrian Black Pine. Apply wire at a 45-degree angle, with wire thickness approximately one-third of the branch diameter. Wire during the dormant season when possible, and check wires every 2–4 weeks during the growing season to prevent them cutting into the bark.

Is Austrian Black Pine good for beginners?

Austrian Black Pine has a difficulty level of intermediate. While not the easiest species, it rewards careful attention to watering and seasonal care.

What soil mix should I use for Austrian Black Pine?

Use Conifer Mix (Akadama/Pumice/Lava) for Austrian Black Pine. The key principle is excellent drainage combined with adequate moisture retention. Never use standard garden soil or purely organic potting mix for bonsai, as these compact over time and suffocate roots.

How do I promote ramification on Austrian Black Pine?

Ramification on Austrian Black Pine is rated as medium. Promote finer branching through repeated cycles of growing and cutting back. Allow shoots to extend 4–6 nodes, then prune back to 1–2 nodes. Over multiple growing seasons, this creates increasingly dense and refined branch structure.

When is the best time to prune Austrian Black Pine?

Perform structural pruning on Austrian Black Pine during the dormant season (late autumn to late winter) when the tree's energy reserves are in the roots. Maintenance pruning and pinching of new growth can be done throughout the growing season to maintain shape and promote density.

How cold-hardy is Austrian Black Pine?

Austrian Black Pine requires winter dormancy and tolerates cold well, but container-grown bonsai need root protection from sustained hard freezes below -5°C. Hardy in USDA zones 4-8. Protect container roots by placing in an unheated garage, cold frame, or burying the pot in ground soil during extreme cold.

Quick Reference Summary

Scientific Name Pinus nigra
Common Name Austrian Black Pine
Family Pinaceae
Origin Southern Europe
Group Pine
Indoor/Outdoor Outdoor
Difficulty Intermediate
Bonsai Tradition Modern
Wiring Suitability good
Wire Type copper
Ramification medium
Leaf/Needle Reduction moderate
Nebari Development moderate
Deadwood Suitability good
Substrate Conifer Mix (Akadama/Pumice/Lava)
Repotting Frequency Every 3 years
USDA Zones 4-8
Zurück zum Blog